| Squirrel Works Rockets |
 | |  | |  | |  | |  | |  | |  | |  |
| X-RV Length: 7.23" Wingspan: 7.125" Weight: 0.6 oz Recommended Motors: B4-2, B6-2, C6-3 Laser-Cut Plywood Bulkhead, Balsa Nose Cone Glide Recovery This unusually shaped paper glider has a low center of gravity that causes it to sail back to earth after engine ejection. Ideal for small fields. Kit includes precut plywood bulkhead for durability. Buy It Now 9.95 |
Tuber
Length: 23.375”
Body Diameter: 1.325”
Weight: 3.2 oz
Recommended Motors:
Upper Stage: C11-5, D12-5, D12-7
Booster Stage: D12-0
Two Stage Design
Water Slide Decal
Laser-Cut Balsa and Tube Fins
Balsa Nose Cone
Dual Mylar Streamers
Renowned Texas rocketeer Doug Sams brings
together good looks and rugged tube fin
construction in one exciting design. The Tuber is
the first in our Signature Series of rocket kits.
An engine block at the rear of the booster
ensures positive stage separation during flight.
The booster stage tumbles back to earth, and the
sustainer descends on two mylar streamers. The
kit includes laser cut balsa fins, premitered tube
fins and decals.
Buy It Now 25.95
Length: 23.375”
Body Diameter: 1.325”
Weight: 3.2 oz
Recommended Motors:
Upper Stage: C11-5, D12-5, D12-7
Booster Stage: D12-0
Two Stage Design
Water Slide Decal
Laser-Cut Balsa and Tube Fins
Balsa Nose Cone
Dual Mylar Streamers
Renowned Texas rocketeer Doug Sams brings
together good looks and rugged tube fin
construction in one exciting design. The Tuber is
the first in our Signature Series of rocket kits.
An engine block at the rear of the booster
ensures positive stage separation during flight.
The booster stage tumbles back to earth, and the
sustainer descends on two mylar streamers. The
kit includes laser cut balsa fins, premitered tube
fins and decals.
Buy It Now 25.95
Interstellar Probe
Length: 24.25"
Body Diameter: 0.976"
Weight: 1.9 oz
Recommended Engines:
A8-3, B4-4, B6-4, C6-5
Over 30 Laser-Cut Balsa Parts
Balsa Nose Cone
3 Paper Transitions
Water Slide Decals
Mylar Parachute
Nick Adams is known for his unusual and graceful designs and the second Signature
Series™ kit, the Interstellar Probe is a perfect example.
Launched eons ago by an advanced alien civilization, the Interstellar Probe's purpose
is to catalog everything encountered in the far reaches of space and to autonomously
return home to its creators after exploring the galaxy and beyond for thousands of
years. The onboard sensor and navigation systems have recorded countless worlds
during its voyage, possibly even our own.
Skill level 3, this kit is recommened for experienced builders.
Buy It Now 26.95
Length: 24.25"
Body Diameter: 0.976"
Weight: 1.9 oz
Recommended Engines:
A8-3, B4-4, B6-4, C6-5
Over 30 Laser-Cut Balsa Parts
Balsa Nose Cone
3 Paper Transitions
Water Slide Decals
Mylar Parachute
Nick Adams is known for his unusual and graceful designs and the second Signature
Series™ kit, the Interstellar Probe is a perfect example.
Launched eons ago by an advanced alien civilization, the Interstellar Probe's purpose
is to catalog everything encountered in the far reaches of space and to autonomously
return home to its creators after exploring the galaxy and beyond for thousands of
years. The onboard sensor and navigation systems have recorded countless worlds
during its voyage, possibly even our own.
Skill level 3, this kit is recommened for experienced builders.
Buy It Now 26.95
| Callisto Length: 16.875" Body Diameter: 1.325" Weight: 1.6 oz Recommended Engines: A6-4, A8-3, B6-4, B6-6, C6-5, C6-7 Laser-Cut Fins Balsa Nose Cone and Transition Water Slide Decals Mylar Parachute Styled after NASA rockets of the sixties, this high performance model is destined to become a classic. Kit includes laser cut fins, decals and mylar parachute Buy It Now 17.95 |
| Astrid Length: 16.875" Body Diameter: 1.325" Weight: 1.7 oz Recommended Engines: B4-4, B6-4, C6-5 Laser-Cut Fins Balsa Nose Cone Water Slide Decals Mylar Parachute Equip your fleet with this distinctive 5 fin design. Its sleek styling screams power while maintaining a conservative flight altitude ideal for small to medium size fields. Kit includes laser-cut fins and decals. Parachute recovery. Buy It Now 20.95 |
| Firebird SuperSonic Transport Length: 21.0" Body Diameter: 0.976" Weight: 1.7 oz Recommended Engines: A6-4, A8-3, B4-4, B6-4, C6-5 Laser-Cut Fins Balsa Nose Cone Water Slide Decals Mylar Parachute Remember the late 60’s and early 70’s? We were going to the moon, Mars was just around the corner and supersonic air travel was going to be commonplace. Inspired by SST concepts, the Firebird will be the pride of any fleet. The kit features a balsa nose cone, laser cut balsa fins, water slide decals and a mylar parachute. Buy It Now 19.95 |
High 5
Length: 14.45"
Body Diameter: 1.325"
Weight: 1.7 oz
Recommended Engines:
A8-3, B4-4, B6-4, C6-5
Laser-Cut Fins
Balsa Nose Cone
Handy Water Slide Decals
Mylar Streamer
The third kit on our Signature Series line comes from
young Texas rocketeer Jarod Frankum. Designed as part
of our Iron Rocketeer challenge during NSL 2006, this
'hand'some little rocket became an instant hit with the
crowd. Commenting on his own design, Jarrod says it is
"One small step for hand, one giant leap for handkind"
while notable rocketeers from across the country have
given the kit "three thumbs way up."
Buy It Now 15.95
Length: 14.45"
Body Diameter: 1.325"
Weight: 1.7 oz
Recommended Engines:
A8-3, B4-4, B6-4, C6-5
Laser-Cut Fins
Balsa Nose Cone
Handy Water Slide Decals
Mylar Streamer
The third kit on our Signature Series line comes from
young Texas rocketeer Jarod Frankum. Designed as part
of our Iron Rocketeer challenge during NSL 2006, this
'hand'some little rocket became an instant hit with the
crowd. Commenting on his own design, Jarrod says it is
"One small step for hand, one giant leap for handkind"
while notable rocketeers from across the country have
given the kit "three thumbs way up."
Buy It Now 15.95
Pie In The Sky
Length: 2.75"
Diameter: 4.625"
Weight: 0.6 oz
Recommended Engines: B6-0, C6-0
Laser-Cut Plywood Disc
Peel and Stick Decal
Tumble Recovery
This novelty rocket can be built in minutes, needing
only wood glue for assembly. Its high drag design and
tumble recovery makes it ideal for even the smallest
flying fields. With no parachute or streamer to pack,
this is by far our easiest rocket to prep for flight.
Buy It Now 4.95
Length: 2.75"
Diameter: 4.625"
Weight: 0.6 oz
Recommended Engines: B6-0, C6-0
Laser-Cut Plywood Disc
Peel and Stick Decal
Tumble Recovery
This novelty rocket can be built in minutes, needing
only wood glue for assembly. Its high drag design and
tumble recovery makes it ideal for even the smallest
flying fields. With no parachute or streamer to pack,
this is by far our easiest rocket to prep for flight.
Buy It Now 4.95
Dragonfire
Length: 21.0"
Body Diameter: 1.325"
Weight: 2.0 oz
Recommended Engines: C11-5, C11-7, D12-5, D12-7
Laser-Cut Fins
Balsa Nose Cone
Water Slide Decals
Mylar Parachute
This addition to our line of high flying rockets sports a
Chinese dragon theme, including scalloped fins
reminiscent of wings. Kit comes with laser cut fins,
decals and a 12" mylar parachute.
Buy It Now 17.95
Length: 21.0"
Body Diameter: 1.325"
Weight: 2.0 oz
Recommended Engines: C11-5, C11-7, D12-5, D12-7
Laser-Cut Fins
Balsa Nose Cone
Water Slide Decals
Mylar Parachute
This addition to our line of high flying rockets sports a
Chinese dragon theme, including scalloped fins
reminiscent of wings. Kit comes with laser cut fins,
decals and a 12" mylar parachute.
Buy It Now 17.95
JX-1
Length: 13.875"
Body Diameter: 0.976"
Weight: 1.2 oz
Recommended Engines: A6-4, A8-3, B6-4, C6-5
Laser-Cut Fins
Balsa Nose Cone
Water Slide Decals
Mylar Parachute
Beautifully detailed, this retro sci-fi design is an
eye-catcher both on the pad and in flight. Kit
includes laser cut fins and canards, water slide
decals and a heat resistant mylar streamer.
Buy It Now 15.95
Length: 13.875"
Body Diameter: 0.976"
Weight: 1.2 oz
Recommended Engines: A6-4, A8-3, B6-4, C6-5
Laser-Cut Fins
Balsa Nose Cone
Water Slide Decals
Mylar Parachute
Beautifully detailed, this retro sci-fi design is an
eye-catcher both on the pad and in flight. Kit
includes laser cut fins and canards, water slide
decals and a heat resistant mylar streamer.
Buy It Now 15.95
Battle of Britain Glider Set
Spitfire
Length: 8.2"
Wing Span: 9.8"
Messerschmitt Bf-109
Length: 7.5"
Wing Span: 9.6"
Laser-Cut Balsa Parts
Water Slide Decals
Spitfire
Length: 8.2"
Wing Span: 9.8"
Messerschmitt Bf-109
Length: 7.5"
Wing Span: 9.6"
Laser-Cut Balsa Parts
Water Slide Decals
Designed for use with the Dogfight booster rocket, this kit contains
profile gliders of the famous Supermarine Spitfire and Messerschmitt
Bf-109.
Building great looking planes is a snap, easy to build jigs assure
proper wing alignment and the extensive decal set allows the builder to
finish the gliders exactly as pictured with minimal painting. Trimming
the gliders to turn in opposite directions allows them to make several
passes overhead for a spectacular airshow.
Dogfight Booster Sold Separately.
profile gliders of the famous Supermarine Spitfire and Messerschmitt
Bf-109.
Building great looking planes is a snap, easy to build jigs assure
proper wing alignment and the extensive decal set allows the builder to
finish the gliders exactly as pictured with minimal painting. Trimming
the gliders to turn in opposite directions allows them to make several
passes overhead for a spectacular airshow.
Dogfight Booster Sold Separately.
War In The Pacific Glider Set
Corsair
Length: 8.6"
Wing Span: 10.25"
Zero
Length: 8.0"
Wing Span: 10.0"
Laser-Cut Balsa Parts
Water Slide Decals
Corsair
Length: 8.6"
Wing Span: 10.25"
Zero
Length: 8.0"
Wing Span: 10.0"
Laser-Cut Balsa Parts
Water Slide Decals
WAR IN THE PACIFIC
GLIDER SET
Designed for use with the Dogfight booster rocket, this kit contains
profile gliders of the legendary F4U-1A Corsair and A6M Zero.
Building great looking planes is a snap, easy to build jigs assure
proper wing alignment and the extensive decal set allows the builder
to finish the gliders exactly as pictured with minimal painting.
Trimming the gliders to turn in opposite directions allows them to
make several passes overhead for a spectacular airshow.
Dogfight Booster Sold Separately.
Buy It Now 11.95
GLIDER SET
Designed for use with the Dogfight booster rocket, this kit contains
profile gliders of the legendary F4U-1A Corsair and A6M Zero.
Building great looking planes is a snap, easy to build jigs assure
proper wing alignment and the extensive decal set allows the builder
to finish the gliders exactly as pictured with minimal painting.
Trimming the gliders to turn in opposite directions allows them to
make several passes overhead for a spectacular airshow.
Dogfight Booster Sold Separately.
Buy It Now 11.95
| 1 Left In Stock |
| 2 Left In Stock |
| 2 Left In Stock |
| 3 Left In Stock |
| 3 Left In Stock |
| 3 Left In Stock |
| 1 Left In Stock |
| 3 Left In Stock |
| 3 Left In Stock |
| 2 Left In Stock |
| 1 Left In Stock |