Ejection Baffles & Heat Shields Single and bulk packs

Ejection Baffles & Heat Shields

Throw your wadding away, we are now carrying genuine Nomex heat shields & Ejection baffles.

Camouflaged Nomex Heat Shields With Brass Grommet
They come in two different sizes . Each protector has a brass grommet riveted into the corner for
strength. Also it provides a convenient spot to run your Kevlar/Tubular Nylon or shock cord
through. All are camouflaged in color.

Camo Heat Shield
6"x6"
Buy It Now 4.95

Baffle Kits Made From Light Plywood

IMPORTANT: When using any baffle kits, it is recommended that you install
the baffle such that it is as far forward as possible, while leaving enough
room for your recovery device and its shock cord mechanism. Keeping the
baffle forward does two things. One, the weight (mass) of the baffle is kept
forward, aiding in keeping your model stable (keeping the Center of Gravity
(CG) ahead of the Center of Pressure (CP). Further, the baffle acts as a
barricade to keep your recovery device high up in the model, also aiding in
keeping the model stable.

Nomex Shock Cord Protectors

Nomex® Shock Cord Protectors

Available in 2sizes:
36" & 58" long
State of the Art protection for shock cords, reusable, machine washable
All edges sewn with professional grade Surge Sewing equipment with Kevlar®
thread.

Colour shown is currently dark blue/black. Colour may vary with lots.
Nomex and Kevlar are flame resistant but not flame or fire proof.

36" Shock cord protector
Retail 10.49 Buy It Now 9.96

58" Shock cord protector
Retail 15.99 Buy It Now 15.19

BT-60 Baffle
Buy It Now
4.00

BT-55 Baffle
Buy It Now
3.60

BT-70 Baffle
Buy It Now
5.50

BT-56 Baffle
Buy It Now
3.60

BT-50 Baffle
Buy It Now
1.50

BT-80 Baffle
Buy It Now
6.00

Nomex Heat Shields

Made from tough Nomex material, with heavy
duty threading holes sewn in the corner.
These blankets will provide perfect protection
for your recovery devices. Just cut the
threaded hole and run your cord through.