| Corona-2 Booster |
 | |  | |  | |  | |  | |  | |  |
| Length: 5.23" Diameter: 3.938" Fin Span: 3.938" Weight: 0.65 oz |
| The Corona model rocket kit has a long and unique history. The Corona-2 Booster has added much color to this historic model rocket kit. Purchased separately, the Corona-2 Booster allows you to convert your Corona (old or new) into the most exciting 2-stage model rocket kit ever conceived! Featuring laser cut plywood fins, this unique tube finned booster compliments the tube fin of the Corona. In fact, it is integral to the Corona design in that the upper body ring of this booster mates to the tube fin (tail ring) of the Corona for the most incredible model rocket profile you are ever likely to encounter! See below for more information about this exciting addition to an already exciting kit. |
| The figure on the right shows how the combined stack is readied for flight with a booster motor (B6-0 or C6-0) and a sustainer motor (A8-5, B6-6 or C6-7). Using very basic multi-staging techniques, the Coron-2 stack is quickly readied for flight. If you include the use of a BAF-50 baffle kit with your model, she can be ready for launch in a snap! |
| The following two figures help to explain how this exciting accessory works with the Corona model rocket kit. The figure on the left shows the original Corona kit (far left) with the Corona-2 booster right below it. On the right side of this figure, you can see the combined stack of the Corona plus Corona-2. Truly an exciting accessory that will produce many exciting flights! |
| Corona-2 takes to the air at a local CMASS launch! |
