| Edmonds Aerospace |
 | |  | |  | |  | |  | |  | |  | |  |
| These kits are designed maximize your excitement and pride as you look skyward at what you built. The Rocket Launched Aircraft of the Edmonds Aerospace are designed to let you fly in ways you've never flown before. If you're a new, young modeler, you'll be able to see your very first construction project blast hundreds of feet into the sky with rocket speed, then soar above your head for a minute or more, long enough for you to realize just what you've accomplished with your own two hands. If you're an experienced modeler, you can fly the massive Thunder series models for a sensation unlike any other in model aviation or model rocketry. If you're the leader of a school or youth group, you can give your students an engrossing afternoon together in the sunshine as they watch each other's handiwork perform, because each flight is a little bit different. The secret behind these aircraft is the technology of laser cutting. Whenever a model design requires precise angles or part positioning to work, the computer-controlled laser lets me create accurate fits between pieces to guarantee that precision as you build. That means you always end up with a model that doesn't need special adjustment to fly correctly, even if you're a brand new modeler. Edmonds Aerospace Maker Of Premier Gliders |
| It's cute and a little bit sporty, but you'll finish assembling your Tinee in less than a half hour, even if you've never built a model before. Thanks to the repeatability of laser cut parts, you can fly Tinee with no adjustments at all. This is the model for your scout troops and school science clubs, as I designed it to be the most mistake-proof and lowest-cost kit that the current state of the art will allow me to produce. Though the flight can fit within a typical school athletic field, students will be delighted by the time that Tinee remains in the air. |
| Tinee Span: 6 inches Motors:1/2A3-2T, A3-4T Retail 6.99 Buy It Now 6.64 |
| CiCi shows you just what kind of performance you can achieve with a small, simple model. CiCi is great for students or scouts that want to use standard-size motors and want the extra kick of maximum speed and altitude. CiCi is as basic to build as Tinee, but you won't mistake CiCi's blinding dash for altitude on a C6-3 motor for a flight by anything else. Laser-cut fuselage and flying surfaces combine with a computer-machined nose cone to make the parts so reliable that your CiCi doesn't even need balance weight. Get a few of these low-cost models for yourself and truly fly to your heart's content. |
| CiCi Span: 8 inches Motors: A8-3, B4-2, B6-2, C6-3 Retail 7.99 Buy It Now 7.59 |
| Two stages of power hurl this model to surprising altitudes. Both the hefty booster and the sleek upper stage can use up to a C motor. All this speed and performance comes to you with simplicity, as you'll construct this model in about two hours using glue only and fly with no adjustments. |
| CiCi Stage 2 Booster Span: 12 inches Booster Motors: B6-0, C6-0 Upper Stage Span: 9 inches Motors: 1/2A6-2, A8-3, B4-4, C6-5 Retail 19.99 Buy It Now 18.99 |
| CiCi Stage 2 Thunder Booster Span: 18 inches Booster Motor: D12-0 Upper Stage Span: 13.5 inches Motors: D12-5, E9-6 Retail 34.99 Buy It Now 33.24 |
| These familiar triangles find their homes in the skies over flying fields from New England to San Diego. This 1995 design inaugurated the Edmonds Aerospace standards for mistake-proof beginner-oriented kits with precision wet die-cutting and realistically illustrated instruction sets. Now laser cutting has only made them better. Your students or scouts will love the little triangles, as they give the best performance of any of my beginner's models. The model is a traditional boost glider, with a motor pod and a glider that separates after being carried to altitude. Builders assemble the model and add balancing clay, and they're ready to fly. No other adjustment is required. |
| Micro Deltie Span 6 inches Designed for 1/4A Motors Retail 10.00 Buy It Now 9.50 |
| Deltie B Span: 13.5 inches Motor: B4-2 Retail 14.95 Buy It Now 14.20 |
| Deltie Thunder Span: 27 inches Motor: D12-3 Retail 29.99 Buy It Now 28.49 |
| Here's another thing to do with Delties. Deltie Airshow uses a booster powered by a B or C motor to carry three Delties straight up over the field, then releases all three to fly off separately. The separation looks just like the Vertical Break maneuver performed by the Blue Angels! You'll enjoy inviting a crowd of your friends around to see you fly this one. Each Deltie is 9 inches in span |
| Deltie Airshow Glider Span: 9 inches Booster Motors: B4-4, C6-5 Retail 19.99 Buy It Now 18.99 |
| The Ecee series models give you a sophisticated ride. Ecee gives you a quick introduction to the world of Rocket Glide (R/G) where the model climbs aloft and descends as a single unit. The Ecee uses the Edmonds Canard system for boost, in which the elevator surface on the canard is left to move freely for flight under thrust and coast, but then locked down into position for glide. The regular Ecee uses mini engine power and can be flown on almost any field. |
| Ecee Span: 13.5 inches Motors: 1/2A3-2T, A3-4T Retail 13.99 Buy It Now 13.29 |
| Ecee Thunder Span: 27 inches Motor: D12-3 Retail 34.99 Buy It Now 33.24 |
| A fellow named Mitch Amos once proposed a model made from two separate aircraft that would blast off as a single unit, then split apart to glide in individually. I met that challenge a pair of what the engineers call "tailless" aircraft, because they have no horizontal stabilizer. They launch in a symmetrical configuration, reach altitude, and are then blown apart by the motor to fly back down in a spirited, energetic glide. The repeatable laser cut parts again mean that builder only needs to add a bit of nose weight, then the adjustments are complete. |
| Geminee Span: 13.5 inches Motors: 1/2A3-2T, A3-4T Retail 12.99 Buy It Now 12.34 |
| Geminee Thunder Span: 27 inches Motor: D12-3 Retail 29.99 Buy It Now 28.49 |
| This pair of aircraft is launched together on a single B or C motor. They climb high above the field until the motor fires its ejection charge. The two planes then separate in an exciting split maneuver. One glides down carrying the motor, the other comes back on its own. You'll build the entire set in less than two hours using glue only, and the only adjustment required is to add balancing clay right after the glue dries. |
| Twinsee Span: 8 inches Motors: B4-2, B4-4, C6-5 Retail 19.99 Buy It Now 18.99 |
| Twin Thunder Span: 12 inches Motor: D12-3 Retail 32.99 Buy It Now 31.34 |
| This is the easiest way to experience the Thunder. Put together eight wood parts and assemble the booster pod, and you are up. The big D12-3 motor hurls Dee Cee Thunder up where everybody can see it, then lets it float back in a nice, solid glide. Get a few packs of motors and a can of Rock Creek Cola and fly all afternoon with this big easygoing design. |
| Dee Cee Thunder Span: 18 inches Motor: D12-3 Retail 27.99 Buy It Now 26.59 |
| Edmonds Aerospace Elcie G-Pack 12 Gliders & Booster Rocket |
The G-Pack
This special package will get your students into the
air more quickly and at lower cost than any other
rocket-powered product. You will enjoy costs of
less than $2.50 per student and build times of as
little as twenty minutes! Individual aircraft for 12
students are packaged with a single rocket booster
that launches three aircraft at a time. Each student
experiences a rocket launch of her own model, yet
you can launch all twelve students with only four
motors, cutting your flying costs by two thirds.
Each group of 3 students can enjoy competing to
see which aircraft remains aloft the longest!
This special package will get your students into the
air more quickly and at lower cost than any other
rocket-powered product. You will enjoy costs of
less than $2.50 per student and build times of as
little as twenty minutes! Individual aircraft for 12
students are packaged with a single rocket booster
that launches three aircraft at a time. Each student
experiences a rocket launch of her own model, yet
you can launch all twelve students with only four
motors, cutting your flying costs by two thirds.
Each group of 3 students can enjoy competing to
see which aircraft remains aloft the longest!
How About a Birthday Party?
The G-Pack builds so quickly enough
that you could actually use the Elcie
as a party favor! Start the party with
a quick building session, let the
models dry while the kids eat and
play a few games, then bring out the
launcher for a spectacular end to the
festivities. You know how much
children love the excitement of a
flying model. Now you can be
creative and bring that excitement
into all sorts of activities.
The G-Pack builds so quickly enough
that you could actually use the Elcie
as a party favor! Start the party with
a quick building session, let the
models dry while the kids eat and
play a few games, then bring out the
launcher for a spectacular end to the
festivities. You know how much
children love the excitement of a
flying model. Now you can be
creative and bring that excitement
into all sorts of activities.
| (12) Elcie G's |
Inside the Pack
The new Elcie aircraft is assembled from five laser cut pieces and requires no adjustment.
The 3-ship booster has tough plywood mounts for the Elcie's that will last flight after flight.
You can build it easily the night before your student session. Even if you're a beginner
yourself, you'll have no problem guiding your children through a thrilling new experience.
The new Elcie aircraft is assembled from five laser cut pieces and requires no adjustment.
The 3-ship booster has tough plywood mounts for the Elcie's that will last flight after flight.
You can build it easily the night before your student session. Even if you're a beginner
yourself, you'll have no problem guiding your children through a thrilling new experience.
| Retail Price Buy 29.00 It Now Only 27.55 |
| Arcie II Motor: C11-3, D12-3, E9-4 Retail 39.99 Buy It Now 37.99 |
| Includes: Arcie II single-channel aircraft and rocket booster Requires: HitecRCD Feather Receiver and one HS-55 servo. 50 mah NiCad or 120mah NiMH battery pack. C11-3, D12-3 or E9-4 motor. |
| Edmonds Aerospace Arcie II Rocket-Launched Radio Controlled Aircraft System |
| Radio Gear Source: Balsa Machining Service - Buy your Arcie II here, then go to BMS for a complete package of gear just for Arcie II including transmitter, receiver, matched frequency crystals, batteries and charger. |
| Please note this is only the kit itself you must provide the R/C equipment. |
| Glider Length: 21.25" Wingspan: 18" Fairing Diameter: 0.98" Weight: Glider, raw parts: 2.3 oz Glider, built, w/ RC gear: 3.5 oz Full stack, no engine: 5.0 oz Altitude: 500 ft on D12, 1000 feet on E9 Recovery: R/C Glider/ 12" Parachute Recommended Engines: D12-3, E9-4 |
| Deltie Span: 9 inches Motors: 1/2A3-2T, A3-4T Retail 9.99 Buy It Now 9.49 |
| Out Of Stock |
| Out Of Stock |
| Out Of Stock |
| Out Of Stock |
| 1 Left in stock |
| Out Of Stock |